Welcome to Cheerico Cupcake Supplies!

7 Tier White Square Maypole Cupcake Stand Tower Display

Be the first to review this product

Availability: In stock

MYR380.00
OR

Quick Overview

This 7 Tier Square Cupcake Stand can be used as 7,6,5,4,3,2 tier stand.
The entire size: Length 440 * Width 440 * Height 629mm
This stand will hold around 150 cupcakes.

7 Tier White Square Maypole Cupcake Stand Tower Display

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description


7 Tier White Square Maypole Cupcake Stand 

The entire size:
Length 440 * Width 440 * Height 629mm 
Tier 1: 140*140mm         
Tier 2: 190*190mm             
Tier 3: 240*240mm     
Tier 4: 390*290mm       
Tier 5: 340*340mm         
Tier 6: 390*390mm             
Tier 7: 440*440mm

# # 1st,2nd,3rd,4th,5th,6th tier is 4mm thick, 7th tier is 5mm thick and 100mm apart. The total height of the stand is 629mm. 
# The acrylic comes wrapped in the manufactures protective covering

There is no need for glue or other fixings.
The edges of the acrylic are perfectly clear and polished.
Every part of the stand has been accurately cut and finished
Can be taken apart, washed and stored away for another time.
The stand comes flat packed and only takes a few minutes to assemble.

How many cakes can it hold? 150 cupcakes

We base our numbers on using a 60mm diameter cupcake for our Square range.

 

Download Assembly instructions for SQUARE cupcake Stand

Parts:
Acrylic discs, head screws, acrylic rods and acrylic feet.

1. Remove the manufacturer’s protective cover from BOTH side of each acrylic component.
2. Take 4 metal head screws and place it on to a flat surface where the stand is to be constructed
3. Now screw the 4 acrylic rods onto the screw thread of the head screw making sure the acrylic disc is clamped firmly between two components.
4. Begin by placing the feet to the underside of the bottom disc ensuring they are evenly spaced.
5. Carefully line up the hole(s) of the largest disk with 4 head screws ensuring the disc is resting securely on the acrylic feet.
6. Continue by placing the next largest disc on to the screw thread of rods and tighten each piece as you go.
7. The final rod is to be used as the supposed for the top tier and the stand is completed by adding the other screw cap into the top.


CARE GUIDE:
The stand is made from acrylic which will scratch if it is not looked after properly.
To clean the product use warm water with a little washing-up liquid and soft cloth.
Do not use any abrasive cleaning products as they will make the acrylic.
Do not put the stand in a dishwate

You may also be interested in the following product(s)

1 Cupcake Window Box with Handle($1.20/pc x 25 units)

1 Cupcake Window Box with Handle($1.20/pc x 25 units)

MYR30.00

2 Cupcake Window Box with Handle($1.30/pc x 25 units)

2 Cupcake Window Box with Handle($1.30/pc x 25 units)

MYR32.50

 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.